Monel 400 Pipe

Our company specializes in the supply ASME standard monel pipes and pipe fittings exports, exports to the Middle East, Europe

   Monel Alloy 400:. NCu30 (N04400) NCu30Fe, a seawater, chemical solvents, ammonia, sulfur, chlorine, hydrogen chloride and various acidic medium such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, an organic acid, alkaline medium, salt nickel base alloy material having a good corrosion resistance, and the molten salt, Monel Alloy 400 at the same time having good mechanical properties, from a low temperature to a high temperature and a wide range of use temperature, having a good weldability and in high intensity. For the field of chemical and petrochemical, and marine developmentImplementation of standards :: GB/T5235-2007GB/T21653-2008GB4435-84GB/T2072-2007Q/SH25-2010Q/SH70-2010Monel 400 Mechanical propertiesShape Tensile Strength Yield Strength(0.2% Offset) Elongation% Hardnessksi MPa ksi MPa Brinell(3000-kg) Rockwell BStick 70-110 480-760 25-85 170-585 50-5 of the 110min 60minIn plates 70-95 482-65528-75 193-51750-30 110-21560-96Sheet 70-120 482-827 30-110 207-758 45-2 65minWith 70-140 482-965 25-130 172-896 50-2 68minOf PULL 70-180482-1241 30-170 207-117245-2 Of Monel the chemical compositionChemical Composition /%Ni + Co Mn Cu Fe C Si SMonel 400 NCu30 (NW4400, UNS N04400) ≥ 63.0 ≤ 2.0 28.0 ~ 34.0 ≤ 2.5 ≤ 0.30 ≤ 0.5 ≤ 0.024The Monel Grade Ni Fe C Si Mn Cu OthersMonel400 Ni68Cu28Fe ≥ 63.0 ≤ 2.5 ≤ 0.30 ≤ 0.5 ≤ 2.0 28.0 ~ 34.0 ≤ 0.024Monel405 Ni68Cu28SMonel 400 (Ni68Cu28Fe)Monel 400 is a large amount of versatile, good performance, high corrosion resistance of nickel-copper alloy. The chemical composition is mainly composed by Cu30% and Ni65%, plus a small amount of Fe (1-2%). The organizational structure of the single-phase austenite.Monel 400 physical constantsThe proportion of the melting point of the elastic modulus Mpa Poisson ratio Curie pointTension and compression twist1293-1349 179 140 179 140 65 455 8.83 0.32 -6.7Monel 400 thermal conductivity, expansion, specific heat and conductivityTemperature °C average linear expansion coefficient × 10-6 / K thermal conductivity W / (mk) than hot-× 103J (Kg.K) resistivity μΩ.m-184 10.98 16.272 0.209 --73 12.06 20.016 0.368 -21.1 - 21.744 0.427 0.5193 13.86 24.048 0.44 0.53204 15.48 27.792 0.461 0.56316 15.84 30.96 0.477 0.57427 16.02 34.272 - 0.59538 16.38 38.016 - 0.61Monel 400 rod mechanical propertiesGrades the temperature °C tensile strength σbMPa elongation δ (%) hardness HBMonel 400 (cold drawn state) -7981022 \Monel 400 (of forging state) -25398038 \Monel 400 (annealed) at room temperature 510-58040-60 120-160Monel 400 (thermal processing state) at room temperature 620-80030-60 160-280Monel 400 (cold drawn state) at room temperature 650-85030-50 180-260Monel 400 annealed 30056045Monel 400 annealed 40049847 \Good welding performance Monel 400, TIG and MIG method, submerged arc welding wire can Monel 60: manual arc welding together: welding carbon steel and low alloy steel, Monel 190 electrodes.Monel 400 is mainly used in the chemical and petrochemical, and marine development. The manufacture of a variety of heat transfer equipment, boiler feedwater heaters, oil and chemical pipelines, container, tower, tank, valves, pumps, reactor shaft.Product Name: Monel 400 rod lineProduct features: a seawater, chemical solvents, ammonia, sulfur, chlorine, hydrogen chloride, various acidic medium such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, an organic acid, alkaline medium, the salt and the molten salt having a good corrosion resistance The nickel-base alloy materialUsage: used in the field of chemical and petrochemical, and marine development. Can be used to create a variety of heat transfer equipment, boiler feed water heater, pressure vessel equipment oil and chemical pipelines, container, tower, tank, valves, pumps, reactor, shafts, etc.

Monel 400 Pipe